3. Installation
3.13. Cellular Modems
The RX1510 can be equipped with cellular modem modules for operation on GSM, EDGE, HSPA +, or CDMA networks. The cellular modems feature 50 Ω SMA antenna connectors on the front plate of each module. The following cellular modem modules are available:
Module Order Code | Description |
W11 | 1 Port Cell Modem GSM,EDGE,HSPA+ |
|
|
W12 | 2 Port Cell Modem GSM,EDGE,HSPA+ |
|
|
W21 | 1 Port Cell Modem EVDO Rev.A Verizon Wireless |
|
|
W22 | 2 Port Cell Modem EVDO Rev.A Verizon Wireless |
|
|
W32 | 1 Port Cell Modem GSM,EDGE,HSPA+, 1 Port Cell Modem EVDO Rev.A Verizon Wireless |
|
|
Table 3.10. Cellular Modem Modules
Figure 3.30. Single Port Cellular Modem: Antenna Connections
Figure 3.31. Dual Port Cellular Modem: Antenna Connections
If two or more antennas are to be installed, the antennas must be separated by a minimum distance of 20 cm (7.9").
RuggedCom® RuggedBackbone™ | 31 | RX1510 Installation Guide Rev 104 |
