Runco 1080p 2.3 VX-44d/-55d Rear-Panel Keypad, Power Button, Focus, Zoom, Lens Shift, Auto Setup

Controls and Functions

2.3

VX-44d/-55d Rear-Panel Keypad

Figure 2-3shows the VX-44d/-55d rear-panel keypad.

1 2 3 4 5 6 7 8 9 10

12 11

Figure 2-3. VX-44d/-55d Rear-Panel Keypad

1.LED STATUS DISPLAY

The LED status window displays an active pattern of segments to indicate the projector is changing its state from powered down to powered up. The message “On” appears in the display when the projector has completed its initialization and is ready for use.

2.POWER BUTTON

Not used. Use the DHD Controller to turn the projector on or off.

3.FOCUS ( / )

Use these buttons to focus the projected image.

4.ZOOM ( / )

Use these buttons to increase or decrease the projected image size.

5.LENS SHIFT

Press this button to access the motorized lens shift controls.

6.AUTO SETUP

Press this button to initiate an automated process in which the projector optimizes critical display parameters for the current source.

7.SHUTTER

Press and hold this button for two seconds to toggle the internal mechanical shutter blade closed or open. A closed shutter blanks the display (turns it to black). Close the shutter to mute all display while maintaining access to projector functions. Opening the shutter restores the image.

8.MENU

Press this button to show or hide the projector menus.

The VX-44d/-55d has its own internal menu system, separate from

Note that of the DHD Controller. However, it is intended for use by trained service personnel only.

8 Runco VX-44d/-55d Owner’s Operating Manual