Runco 1080p manual Cinema

Operation

Table 4-1. Aspect Ratio Settings (continued)

	Remote
Aspect Ratio	Control		Description
	Key
VirtualWide	V-WIDE			VirtualWide scales a 4:3
				image NON-linearly (more on
		4:3 Image on		the sides than in the center)
		16:9 Screen (Display)		to fit a 16:9 screen.

4:3 Image on 16:9 Screen with VirtualWide

	On a 2.35:1 screen, the
4:3 Image on	image is centered between
	black bars on either side.
2.35:1 Screen
with VirtualWide

Cinema	CINEMA		Select Cinema to view 2.35
			source material in its native
			aspect ratio.
			With a 16:9 screen and a
			non-CineWide projector (no
		2.35:1 Image on	anamorphic lens), the upper
			and lower portions of the
		16:9 Screen
		(Cinema aspect ratio / no CineWide)	screen are masked, but the
			geometry of the active image
			area is unchanged.
			With a 2.35:1 screen and a
		2.35:1 Image on	CineWide-equipped
			projector, the DHD Controller
		2.35:1 Screen
		(Cinema aspect ratio / CineWide)	scales the 2.35:1 image so
			that the active image area fills
			the 16:9 chip surface,
			eliminating the black bars.
			The secondary, anamorphic
			lens then restores the proper
			geometry to the 2.35:1
			image.

Runco VX-44d/-55d Owner’s Operating Manual 65