Runco 1080p manual anamorphic lens in the light path, the aspect ratio is, No Resizing

Installation

Auto Setup also optimizes the following settings, based on the characteristics of the incoming signal:

			•	Pixel Tracking
			•	Pixel Phase
			•	Size and Blanking
			•	Height
			•	Position
			• White Balance (Input Levels)
			If additional fine-tuning is necessary after performing an Auto Setup, continue with the
			next section.
	Size and Position Menu ➤		In the Size and Position Menu, you can increase or decrease the size of your image,
			change its proportion (aspect ratio), move the image to a specific area of the screen, and
			refine other related parameters. Use Size and Position controls to match the image
	Size and Position
1.	Size Presets	No Resizing	precisely to the screen. Changes made in the Size and Position menu take effect
2.	Size	0.866	immediately and are saved when you exit the menu.
3.	Height	1000
4.	Pixel Tracking	858
5.	Pixel Phase	0	Size Presets: Select a Size Presets option to quickly display an image in its native
6.	Horizontal Shift	360
7.	Vertical Shift	262	resolution or to automatically resize an image to closely fill the projector’s native resolution
8.	Reserved
			of 1920x1080, or to optimize the display width or height.
9.	Reserved

0.Advanced

Note	The “native” aspect ratio is with the primary lens only. With an
	anamorphic lens in the light path, the aspect ratio is 2.35:1.

Size, Position and Blanking parameters automatically adjust accordingly. If Blanking is set first, which defines an Active Input Area, Size Preset scaling occurs in this region of interest only.

The default setting is either No Resizing or Custom, depending on the input signal resolution. Do not change it unless specifically instructed to do so by Runco

Technical Support.

•No Resizing: Select No Resizing to display the image in its native resolution, which may or may not match the projector’s resolution. For example, for a computer display with a native resolution of 800 x 600, “No Resizing” uses the central 800 x 600 pixels and has a black border – the black border areas are unused pixels.

No Resizing

SVGA 800x600

1920

1080	Active
	Image
	Area

1080

NTSC

1920

Active

Image

Area

Source Type

HDTV 720p

1920

1080	Active
	Image
	Area

1080

HDTV 1080i

1920

Active

Image

Area

Unused Pixels Unused Pixels Unused Pixels

Figure 3-19. Resize Presets: No Resizing

50 Runco VX-44d/-55d Owner’s Operating Manual