Runco operation manual LS-3/LS-5 Remote Control, Projector on

Controls and Functions

1.ON

Use this button to turn

the projector on.	1	ON	POWER	OFF
		l		2

2.OFF

Use this button to turn		SOURCE
	1	2	3
the projector off.			3
	4		5

3.Source Selection

Buttons (1-5):			▲
Press to select a video	4	▲	ENTER	▼
source. By default, these
buttons are assigned as			▼
follows: 1 = HDMI 1; 2 =	6	MENU			5
HDMI 2; 3 =
Component 1; 4 =			USER MEMORY		7
		M1	M2	M3
S-Video; 5 = Video.
However, you can assign				SHARP
each button to any	8
source you wish.		GAMMA	OS	NR
4. Cursor Keys ( , , ,	10	PIP	SWAP	LIGHT	9
)

Use these buttons to select items or settings, adjust settings or switch display patterns.

ENTER

Press to select a highlighted menu item or confirm a changed setting.

5.Aspect Ratio Selection Button

Press this button repeatedly to select one of the following aspect ratios:

16 : 9: For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.

Letterbox: For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.

4 : 3: Scales the input signal to fit 4:3 sources in the center of the screen.

4:3 Narrow: Scales the input signal to fit 4:3 sources in the center of the screen when using an anamorphic lens.

Native: Displays source image in its native resolution without re-sizing or overscan.

6.MENU

Press this button to show or hide the OSD controls.

7.Memory Preset Buttons (M1 / M2 / M3)

Press to recall settings for the current input from one of three memory presets. By default, these buttons are assigned as follows: M1 = User Memory 1; M2 = User Memory 2; 3 = ISF Night. However, you can assign each button to any memory preset you wish.

2.3

LS-3/LS-5 Remote Control

Runco LS-3/LS-5 Installation/Operation Manual 11