Runco LS-3, LS-5 operation manual Operation, Selecting Video Memory, Selecting an Aspect Ratio

Operation

4. Operation

Press M1, M2 or M3 to recall settings from a memory preset. Then, press ENTER to confirm your selection. Or, to cancel the operation, press to select Cancel and press

ENTER.

You can assign each of these three buttons to any of four
memory presets. For more information, refer to M1 Key /		USER MEMORY
M2 Key / M3 Key on page 61.	M1	M2	M3

4.1

Selecting Video Memory

SHARP

Press the aspect ratio () button to select the appropriate aspect ratio for the type of program material being viewed.

4.2

Selecting an Aspect Ratio

When you turn on the LS-3/LS-5, it switches to the last selected input and looks for a valid signal.

Use these buttons on the remote control to select an input source directly. You can assign each of these five buttons to any input. The default assignments are: 1 = HDMI 1, 2 = HDMI 2, 3 = Component 1, 4 = S-Video, 5 = Video.

SOURCE

1 2 3

45

▲

4.3

Selecting An Input Source

For more information, refer to 1 Key / 2 Key / 3 Key / 4 Key / 5 Key on page 61.

Runco LS-3/LS-5 Installation/Operation Manual 37