Runco Vision 85 manual Picture, Surface, eliminating the black bars

Operation

Table 4-1. Aspect Ratio Settings (continued)

Aspect Ratio		Description
Cinema			Select Cinema to view 2.35 source
			material in its native aspect ratio.
			With a 16:9 screen and a non-CineWide
			projector (no anamorphic lens), the upper
	2.35:1 Image on		and lower portions of the screen are
	16:9 Screen
			masked, but the geometry of the active
	(Cinema aspect ratio / no CineWide)
			image area is unchanged.
			With a 2.35:1 screen and a
			CineWide-equipped projector, the VHD
	2.35:1 Image on		Controller scales the 2.35:1 image so that
	2.35:1 Screen		the active image area fills the 16:9 chip
	(Cinema aspect ratio / CineWide)
			surface, eliminating the black bars. The
			secondary, anamorphic lens then restores
			the proper geometry to the 2.35:1 image.
IntelliWide 2.35			A 16:9 image is scaled NON-linearly (more
			on the sides than in the center) to fit a
	16:9 IImage on		2.35:1 screen. IntelliWide 2.35 is available
	22..35:1 Screen		only on the Vision 85/CineWide and only
			on the analog inputs (HD/RGB, SD
			Component, Composite and S-Video).
	16:9 Image on
	2.35:1 Screen with
	Virtual Cinema

Use the controls in the Picture Menu to calibrate your Vision 85 for optimum picture quality.

The Vision 85 has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that setup and calibration be performed by an ISF certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each input separately.

When you change a picture quality setting, save the change to a preset

Note afterwards. Otherwise, the change will be lost when a different input is selected. (Picture quality settings are saved for each input and resolution separately.) For information about saving settings, refer to ISF Presets on page 44.

Picture

Picture

Brightness

Contrast

Color

Tint

Sharpness

Vidikron Vision 85 Owner’s Operating Manual 39