Main
Contents
Connections to mains supply
Safety Instructions
appropriately.
cause your warranty to be invalid.
factors (pesticides, fire, etc.).
Safety Instructions
turn off the water inlet and leave the door slightly open. This is so that the inside of your
Before using the appliance
Programme dial
Before using the appliance
as they will need to be re-used if the machine has to be transported.
Check location where the washer will be installed. Make sure you have everything
Never put cardboard, wood or other materials under your machine to try and stabilise
To prevent leakages on the connection joints, 1 seal is included in the hose packing, (Fit
Installation
9
Page
Separate heavily soiled items from lightly soiled ones, even if they would normally be
loading capacity indicated in the programme table for washing programmes. The
Pillow case 0.2
Do not exceed the maximum fill line.
Select the required washing programme by rotating the programme dial in either direction
Note
section 9.
programme*
Before starting the programme, you can select an additional function if you so wish.
Page
Page
Washing procedure & programme selection
Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as and
Do not put sharp or metal object in your washer, or they can damage the finish. Check
Reconnect power supply cord.
Filters are used to avoid dirt and foreign substances in the water from entering the
Having the filters cleaned, you can fit them in the same way reversely.
filter hole to soak up remaining water.
Page
Removing stains
of fabric it is, and whether the fabric is colourfast(Check the care label).
Trouble shooting
recommended and settle the laundry in the machine
discharge water.
Your machine is overloaded with
Water tap is turned off. Turn your faucet on.
Trouble shooting
Specification
Connection to the mains supply
If this plug is unsuitable or needs to be replaced, please note the following:
For UK use only Plug fitting details (where applicable):
Spare parts
Spare parts Contact details
or
call 0845 208 8750
PCB Available at www.productcareuk.com
Revision 1
Opening times: Monday - Friday