Select Language Main Page
Model
SyncMaster 320PX
The color an d appearan ce of the pro duct may va ry dependi ng on the mo del, and the pr oduct spec ification s are
subject to change without prior notice for reasons of performance enhancement.
Connections Installing the Stand KIT
Note
• Only the supplied bolts should be used.
Caution
Samsung Electronics will not be responsible for damages caused by using a b ase other than those
specified.
Installing the Semi Stand
Left stand Right stand
Caution
Make sure to install the stand with the Caution label
folded backwards.
1) A 'Cover-Protector' is used to protect the hole at the bottom of the LCD Display , where the stand is
inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or Stand KIT
(sold separa tely) and cover the ho le using the 'Cover-Hole' when attaching the wall mount kit.
2) Set up the left and rig ht stands respective ly.
3) Insert the stand into the hole at the bottom of the LCD Display.
Insert the screw into the hole indicated and tighten it. (M4 x L15)
Caution
Safety Instructions
Introduction
Connections
Installing the Stand KIT
Connecting the LCD
Displa y
Using the Software
Adjusting the LCD Display
Troubleshooting
Specifications
Information
Appendix