This stand is designed for adjusting the screen angle. The company is not responsible for any problem
caused when using this stand. Under no circumstances use the product as a stand for placing something on.
Installing the Stand KIT (sold separately)
1) A 'Cover-Protector' is used to protect the hole at the bottom of the LCD Display , where the stand is
inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or Stand KIT
(sold separa tely) and cover the ho le using the 'Cover-Hole' when attaching the wall mount kit.
2) Ensur e that the pa rts are inse rted in the right directio n and in the r ight place . (M4 x L15)
3) Insert the stand into the hole at the bottom of the LCD Display.
4) Insert the screw into the hole indicated and tighten it. (M4 x L15)
Connecting the LCD Display
Using a Power cord with Eart h
In the event of failure, the earth lead may cause electric sho ck. Make su re to wire the earth lead in
correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect
the AC power i n advance.
Note
AV input devices such as DVD players, VCR's or camcorders as well as your computer can be connected
to the LCD Display. For detailed information on connecting AV input devices, refer to the User Controls
under Adjus ting Your LC D Display.
Connecting to a Computer