Samsung 3560 Printing on Special Print Materials, Printing on Envelopes, To open the rear cover

To open the rear cover:

1Open the rear cover by pulling it down. The cover functions as the output tray.

CAUTION: The fusing area inside the rear cover of your printer becomes very hot when in use. Take care not to burn your fingers when you access this area.

2Pull the extender to extend the rear cover to its full-length position to hold longer paper.

Printing on Special Print Materials

Printing on Envelopes

Guidelines

•Only use envelopes recommended for laser printers. Before loading envelopes in the Multi-Purpose Tray, make sure that they are undamaged and are not stuck together.

•Load envelopes into the Multi-Purpose Tray only.

•Do not feed stamped envelopes.

•Never use envelopes with clasps, snaps, windows, coated lining, or self-stick adhesives. These envelopes may severely damage the printer.

1Open the Multi-Purpose Tray and pull the extender.

2 Open the rear cover and pull the extender.

3If you do not want to stack the printed pages on the rear

cover, slide the extender to its place and close the tray. The pages will stack on the output tray.

NOTE: The rear cover can hold up to 100 sheets of paper. If the cover is overloaded with printed pages, it may fall from the printer. Remove the pages so that the cover is not overloaded.

4.6 Using Print Materials