Samsung LS46BETNS/XSG manual Swap Direct button on the remote control is Swap button, Position

those devices in a small window super-imposed on the PC Video signal. (Off/On)

More than one PIP couldn't be overlapped on screen as BNC and the component use the same terminal.

1) PIP

-The direct button on the remote control is 'PIP' button.

Off

On

:Turn the PIP Screen on or off.

2)Source

-The direct button on the remote control is 'SOURCE' button.

PC / DVI

: AV / S-Video / Component Mode

BNC

: AV / S-Video Mode

AV / S-Video

: PC / BNC / DVI Mode

Component

:PC / DVI Mode

:Select the input source for the PIP.

3)Swap

-The direct button on the remote control is 'SWAP' button.

:Swapping the contents of the PIP and main image.

The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window.

4) Size

- The direct button on the remote control is 'SIZE' button.

: Change the Size of the PIP window.

If you select , , in Size, Position and Transparency will not be activated.

5)Position

:Change the Position of the PIP window.

6)Transparency High

Medium

Low

Opaque

:Adjust the Transparency of PIP windows.

Available Mode : PIP

Edit Name Name the input device connected to the input jacks to make your input source selection easier.

MagicNet couldn't be renamed.

1)PC

2)BNC

3)DVI

4)AV

5)S-Video

6)Component

1) PIP

2)Source

3)Swap

4)Size

5)Position

6)Transparency