Samsung PL58A650T1F Network Connection Wireless, Network selection, Connect the Samsung Infolink

Network Connection - Wireless
You can connect to the Samsung’s Infolink network wirelessly through a wireless IP sharer.
			TV Side Panel	1 Connect the Samsung Infolink
				Wireless adapter into the Wiselink
The Modem Port			Wireless LAN Adapter	terminal of the TV.
		Wireless IP sharer	for InfoLink
on the Wall
	Modem Cable

➣You must use the Samsung Wireless LAN Adapter for InfoLink(WIS-08BG) to use a wireless network.

➣The Samsung Wireless LAN Adapter for InfoLink is sold separately. Contact a Samsung Electronics agent or service center for purchasing.

➣To use a wireless network, your TV must be connected to a wireless IP sharer.

➣If the wireless IP sharer supports DHCP, you TV can use a DHCP or static IP address to connect to the wireless network.

➣You must use a wireless IP sharer that supports IEEE 802.11 b or IEEE 802.11g.

➣If the wireless IP sharer allows you to turn on/off the Ping connection function, turn it on.

➣Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

➣Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communications may fail.

➣When applying the security key for the AP (wireless IP sharer), only the following is supported.

•1) Authentication Mode : WEP, WPAPSK, WPA2PSK

•2) Encryption Type : WEP, TKIP, AES

If you apply a security system other than the systems listed above, it will not work with the TV.

Network selection

Select Cable or Wireless as the method to connect to the Samsung’s Infolink network.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2Press the ▲ or ▼ button to select Network selection, then press the ENTER button.

3Press the ▲ or ▼ button to select Cable or Wireless, then press the ENTER button.

•Cable: Connect to Samsung’s Infolink network using a cable.

•Wireless: Connect to Samsung’s Infolink network wirelessly.

➣The menu is activated only if the Samsung Wireless LAN Adapter for InfoLink is connected. (See page 89)

Setup

Setup

Language	: English
Time
Network selection	: Cable	►
Cable Network Setup
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment	: Off
Energy Saving	: Off
Language	: English
Time
Network selection	: Cable	►
Cable Network Setup	Wireless
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment	: Off
Energy Saving	: Off

English - 91