Samsung PL58A650T1F user manual Viewing Closed Captions On-Screen Text Messages Analog, On or Off

Viewing Closed Captions (On-Screen Text Messages) - Analog

The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2Press the ▲ or ▼ button to select Caption, then press the ENTER button.

3Press the ENTER button to select Caption.

Press the ▲ or ▼ button to select On, then press the ENTER button.

4Press the ▲ or ▼ button to select Caption Mode, then press the ENTER button. Press the ▲ or ▼ button to select submenu (Default, CC1~CC4 or Text1~Text4) you want, then press the ENTER button.

Press the EXIT button to exit.

•The default is Default.

•CC1: The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame.

•CC2: The Special Non-Synchronous Use Captions.This channel carries data that is intended to augment information carried in the program.

•CC3: Secondary Synchronous Caption Service.

Alternate program-related caption data, typically second language captions.

•CC4: Special Non-Synchronous Use Captions. Similar to CC2.

•Text1: First Text Service. This may be various non-program related data.

•Text2: Second Text Service. Additional data, usually not program related.

•Text3/Text4: Third and Fourth Text Services. These data channels should be used only if Text1 and Text2 are not sufficient.

Network setup

V-Chip

Setup	Caption	►
	External Settings
	Entertainment	: Off
	Energy Saving	: Off
	PIP
	SW Upgrade

Caption
Caption	: On
	Off
Caption Mode	: Default
Digital Caption Options	On
Move	Enter	Return
Caption
Caption	: On
Caption Mode	: Default	►
Digital Caption Options
Move	Enter	Return
Caption
Caption	: On
	Default
Caption Mode	: DefaultCC1
Digital Caption Options	CC2
Move	Enter	Return

➢• The Caption feature doesn’t work in COMPONENT, PC, HDMI(DVI) modes.

•The availability of captions depends on the program being broadcast.

You can also press the CC button on the remote control to select Captions

On or Off.

English - 66