Samsung PL58A650T1F, BN68-01824A-00, PL63A650T1F, PL50A650T1R user manual Network selection Wireless

Network Test

You can test or confirm the network connection status after setting up the network.

1Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER button.

3Press the ▲ or ▼ button to select Network Test, then press the ENTER button.

➣The current network settings will appear.

➣If no Access Point Select is set up, the test cannot be completed. (See page 95)

Press the EXIT button to exit.

	Network selection	: Wireless
Setup	Cable Network Setup
	Wireless Network Setup		►
	V-Chip
	Caption
	External Settings
	Entertainment	: Off
	Energy Saving	: Off
	PIP
	SW Upgade

Wireless Network Setup

Internet Protocol Setup	: Auto Setup
Network Test
Access Point Select	: AP1
IP Address	:	0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move			Enter		Return

Network Test

MAC Address

IP Address, Subnet, Gateway, DNS Server

Gateway Ping

Domain Ping

Network Test Completed.

Your network is operating properly. If you still have a network problem, contact your network service provider.

Return

English - 96