9Remove the jammed paper by pulling in the direction shown. To avoid tearing the paper, pull it out gently and slowly.
Caution
•Do not touch the green surface, the OPC drum or the front of each toner cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
•Be careful not to scratch the surface of the paper transfer belt.
•If you leave the front cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the front cover should the installation need to be halted for any reason.
10Close the front cover firmly. The machine will resume printing.
Caution
If the front cover is not completely closed, the machine will not operate.
In the fuser unit area
If paper is jammed in the fuser unit area, follow the next steps to release the jammed paper.
1Open the top cover.
2Open the inner cover using the handle on it.
Caution
Do not touch the fuser inside the inner cover. It is hot and could cause burns! The fuser's operating temperature is 180°C
(356°F). Take care when removing paper from the machine.
