Note
•If your machine does not work properly after the installation, try to reinstall the printer driver. See Software section.
•When the printer driver is in installation process, the driver installer detects the locale information of your operating system, and sets the default paper size for your machine. If you use the different Windows locale, you must change the paper size of your machine for matching your commonly used paper size. Go to the printer properties to change the paper size after installation completes.
Printer's basic settings
After installation is complete, you may want to set the printer's default settings. Refer to the next section if you would like to set or change values.
Altitude Setting after Software Installation
The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine to the best print quality or best quality of print.
Before you set the altitude value, find the altitude where you are using the machine.
Value
1High 3
2 High 2
3 High 1
4 Normal
1Ensure that you have installed the printer driver with the provided Printer Software CD.
2
3Click Printer Setting.
4Click Setting > Altitude Adjustment. Select the appropriate value from the dropdown list, and then click Apply.
Note
If your machine is connected to a network, SyncThru Web Service screen appears automatically. Click Printer Setting > Setup (or Machine Setup) > Altitude Adj. Select the appropriate altitude value, and then click Apply.
Changing the display language
To change the language that appears on the display, refer to the following steps.
1Press Menu on the control panel until you see System Setup on the bottom line of the display.
2Press OK to access System Setup.
3Press the left/right arrow until Language displays.
4Press OK.
5Press the left/right arrow until the language you want displays.
6Press OK.
7Press Stop to return to machine ready mode.
Setting job timeout
1Press Menu on the control panel until you see System Setup on the bottom line of the display.
2Press OK to access System Setup.
3Press the left/right arrow until Job Timeout displays.
4Press OK.
5Press the left/right arrow to select the amount of time the machine will wait.
6Press OK.
7Press Stop to return to machine ready mode.
3.4 <Getting Started>