North Star 864 HH Accent Light Installation sku, Optional Equipment for qualified installers only

64 Optional Equipment (for qualified installers only)

Accent Light Installation (sku 94400100)

Make sure power to the fireplace has been turned off prior to installation (disable the service breaker).

Do not connect 110-120 VAC to the gas control valve or the on/off circuit on this fireplace.

The accent light must be removed to install the rear fireback. The remaining firebacks are installed after the accent light is in place.

1Remove the firebacks (if already installed – see page 47). Remove the burner (see 52 for details).

2Remove the cover plate following the directions below.

Cover Plate

3Place the rear fireback in position and install the accent light assemblies following the directions below.

Rear Fireback Magnetic Nutdriver

Accent Light Assemblies

Magnetic Nutdriver

Travis Industries 4070201 100-01182_002