connections
Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier)
1
If using a Coaxial cable (not included), connect the DIGITAL
AUDIO (COAXIAL) jack on the rear of the DVD player to the
DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.
2
Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT jacks on the rear of the DVD player to the HDMI/DVI, COMPONENT or VIDEO IN jack of your TV as described on pages 12 to 16.
Coaxial Cable (not included)
3
Turn on your DVD player, TV, and Amplifier.
Dolby Digital or
DTS amp
4
Press the input select button of the Amplifier to select the audio input your DVD player is connected to in order to hear sound. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Note
-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.
-Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 49 to 50)
-The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.
