Samsung DVD-1080PR user manual Connecting to a TV Interlace, See pages 51 to, Output mode. See

Connecting to a TV (Interlace)

-Connecting to your TV using Component video cables. The 480i resolution is possible with this connection.

-You will enjoy excellent quality and accurate color reproduction images. Component video

separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1

Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV.

Turn on your DVD player and TV.

WHITE

RED

BLUE

GREEN

● CONNECTIONS

		RED
3		Component cable
Set the Video Output to I-SCANin the Display Setup menu.	Audio Cable	(not included)
(See pages 51 to 52)	(Included)
	RED	WHITE
You can also use the VIDEO SEL. button to change the Video		RED BLUE GREEN
Output mode. (See page 16)

4

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

Note

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

-The Component jacks of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of the jacks may vary depending on the TV set. Please refer to the user's manual of your TV.

English _15