Samsung DVD-1080PR user manual Rear Panel

getting started

Rear Panel

1 2

3 4 5

1.AUDIO OUT JACKS

-Use audio cables to connect to the Audio input jacks of your television or audio/video receiver

2.DIGITAL AUDIO JACKS

-Use either an coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use either an coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

3.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

4.COMPONENT VIDEO OUT JACKS

-Use these jacks if you have a TV with Component

Video in jacks. These jacks provide PR, PB and Y video.

-If P-SCANis set to “ON” in Video Output of the Setup Menu, progressive scan mode will work.

-If I-SCANis set to “ON” in Video Output of the Setup Menu, interlaced scan mode will work.

5.HDMI OUT JACK

-Use an HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture.

-If an HDMI cable is connected to an HDMI-compatible TV, HDMI will be output automatically from the player about 10 seconds later.

Note

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

-Refer to the TV's instruction manual for detailed information regarding the TV’s HDMI input jack.

-See pages 51~ 52 to get more information on how to use the setup menu.

10_ getting started