31
ENGLISH
SpecificationsCar Power Adapter
Power Requirements
Power Consumption
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD
(DIGITAL VERSATILE DISC)
CD : 12Cm
(COMPACT DISC)
CD : 8Cm
(COMPACT DISC)
VCD : 12Cm
Composite Video
2 CHANNEL
*Frequency Response
AC 100-240V, 50/60 Hz
15 W
0.6 Kg (without battery pack)
200mm (W) x 27.9 mm (H) x 140mm (D)
+10°C to +30°C
30 % to 80 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx.Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 to 5.6m/sec.
Maximum Play Time :74 min.
Reading Speed : 4.8 to 5.6m/sec.
Maximum Play Time :20 min.
Reading Speed : 4.8 to 5.6m/sec.
Maximum Play Time :74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75Ωload), Q-PAL
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz

General

Disc

Video

Output

Audio

Output

•
Use it as a power supply for your DVD player (See the
illustration to the right.)
1. Plug the power plug of the power adapter into your vehicle’s
cigarette lighter.
(Be sure to use it with the vehicle’s engine turned on.)
2. Connect the connector of the power adapter cable to the power inlet on your
DVD player.
3. Use it only after your DVD player is turned on.
Note : Please don’t use Car Power Adapter to charge the battery.
•
This product contains a built-in fuse to protect the power
adapter from short-circuiting.
•
If the power adapter does not work, check whether the fuse
has blown, and then replace the fuse as needed.
•
Be sure to use a 250V/1.5A fuse only.
1. Rotate the front par t of the plug to remove it from thr power
adapter as shown in the illustration to the right.
2. Replace the fuse with a new fuse of the proper ratings and
put the parts together in the order they were removed.
I

How to use the adapter

I

How to replace the fuse

Replace the fuse and put the parts back in
the reverse order.
Rotate the front part of the plug to remove.
2
1
L70A/75A-Eng-XEF 7/26/05 8:48 PM Page 31