Samsung DVD-R4000EU manual Discs that cannot be played, Audio format logos

Discs (continued)

Discs that cannot be played

≥DVD-Video with a region number other than the number for this unit or “All”

≥Some DVD-R

≥DVD-RAM (2.6 GB/5.2 GB) ≥DVD-ROM

≥DVD-RW ≥DVD-Audio ≥iRW ≥CD-ROM ≥CDV ≥CD-G ≥CVD ≥SVCD ≥SACD ≥MV-Disc ≥PD ≥Photo CD

≥Divx Video Disc, etc.

≥Play of non-standard Video CDs and Super Video CDs is not guaranteed.

DVD-R

You can play DVD-R on compatible DVD players by finalizing [the process that allows recordings on DVD-R to be played on compatible DVD players, (page 40)] them on this unit, effectively making them into DVD-Video.

ªBefore finalizing

You can record onto the available space on the disc and perform editing functions, such as giving titles to discs and programmes and erasing programmes.

You cannot record to or edit DVD-R with this unit if it was recorded with another unit, whether it is finalized or not.

You cannot record over parts that have been recorded. Erasing programmes will not increase the disc’s available time.

ªAfter finalizing

The video and audio is recorded according to the DVD-Video specifications, and your very own DVD-Video is created. ≥The titles you entered with this unit appear as menus. ≥Programmes longer than 5 minutes are divided into 5-minute

chapters.

≥These DVD-R can no longer be recorded on or edited.

≥These DVD-R can be played on other DVD players, but this is not guaranteed.

Play may not be possible due to the player you are using, the DVD-R, or the condition of the recording. Use this unit to play the disc if the player is unable.

For your reference

≥It takes about 30 seconds for the unit to complete recording management information after recording finishes.

≥To record on DVD-R, this unit optimizes the disc for each recording. Optimizing is carried out when you start recording after inserting the disc or turning the unit on. Recording may become impossible after the disc is optimized more than 50 times.

≥The first 30 seconds of a programme may not be recorded if you make successive timer recordings.

≥The video is recorded in a 4:3 aspect irrespective of the video signal input. Use the television’s screen modes to change the screen size for play.

≥Some broadcasts carry signals that allow you to make one copy, but you cannot record these broadcast with DVD-R. Use DVD-RAM to record these kinds of broadcast.

≥Play may be impossible in some cases due the condition of the recording.

≥You cannot change audio type if a DVD-R is in the unit. Select the audio type (M1 or M2) before recording by going to “Bilingual Audio Selection” in the “Sound” menu.

Audio format logos

Dolby Digital (pages 54 and 69)

This unit can play Dolby Digital in stereo

(2 channels). Connect an amplifier with a built-in Dolby Digital decoder to enjoy surround sound.

DTS Digital Surround (pages 54 and 69) Connect this unit to equipment that has a DTS decoder to enjoy DVDs with this mark.

Types of disc for the type of connected

TV

When you use the discs recorded either PAL or NTSC, refer to this table.

TV type	Disc	Yes/No
Multi-	PAL	Yes
system TV	NTSC	Yes
NTSC TV	PAL	No
	NTSC	Yes*1
	PAL	Yes
PAL TV
	NTSC	Yes*2 (PAL60)

*1 If you select “NTSC” in “TV System” (page 61), the picture may be clearer.

*2 If your television is not equipped to handle PAL 525/60 signals the picture will not be shown correctly.

11