Child Lock
The Child Lock deactivates all buttons on the unit and remote control. Use it to prevent other people from operating the unit.
Remote control only
To activate the Child Lock
Hold down [ENTER] (10) and [RETURN] (23) simultaneously until “X HOLD” appears on the unit’s display.
≥If you press a button while the Child Lock is on, “X HOLD” appears on the unit’s display and operation is impossible.
To cancel the Child Lock
Hold down [ENTER] (10) and [RETURN] (23) simultaneously until “X HOLD” disappears.
≥If you cannot cancel the Child Lock, press [RETURN] (23) and then perform the operation.
Connecting external equipment
First of all, please disconnect AC mains leads of all units which you are going to connect with before connecting and disconnecting cables.
Enjoying more powerful sound
Refer to the relevant pages for details.
Digital connection | Page 55 | Pages 60, 62 | |
Connect to an amplifier with | [A] | ≥Set “PCM Down Conversion” |
|
| to “On”. |
| |
|
| ≥Set “Dolby Digital” and “DTS” |
|
|
| to suit the equipment. |
|
|
|
|
|
|
| Change speaker settings on the | — |
|
| amplifier. |
|
|
|
|
|
Analog connection | Page 55 | Pages 60, 62 | |
Connect to an analog amplifier | [B] | ≥Set “PCM Down Conversion” |
|
or system component. |
| to “Off”. |
|
|
|
|
|
Digital connection | Page 55 | Pages 60, 62 | |
Connect to a digital amplifier or | [A] | ≥Set “PCM Down Conversion” |
|
system component. |
| to “On”. |
|
|
| ≥Set “Dolby Digital” to “PCM”. |
|
|
| ≥Set “DTS” to “Off”. |
|
|
|
|
|
Use connection [B] to enjoy discs recorded with a sampling frequency of 96 kHz. Sound will not be output if you use connection [A] and set “PCM Down Conversion” to “Off” due to copy protection. (Convert the signal to 48 kHz to enjoy this type of audio.)
For your reference
≥The equipment connections described are examples.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
Note
You can enjoy Dolby Digital in stereo with this unit alone. (This unit does not have a DTS decoder.)
54