CAMERA WORKING MODE
Now let's take a picture
6 Use the viewfinder or LCD monitor to frame your shot. Turn the LCD button on to use the LCD monitor.
7 When taking pictures, squeeze the Shutter button gently to prevent camera shake.
If you press the Shutter button down fully, the picture will be taken and the data that makes up the picture, will be stored in the internal memory or CF CARD.
The LED will blink red while the images are being captured and stored.
Reference
If there is insufficient memory available,
The [0000] mark will be displayed on the LCD panel.
If you press the Shutter button, the following message will be displayed and the warning sound for low card storage capacity will be heard as two short "beeps".
MESSAGE
MEMORY FULL
OK
Press the Enter button to remove the message.
To extend the amount of memory on the camera, replace the CF CARD or delete unnecessary images stored on the internal memory or CF CARD.
Note
We cannot guarantee the quality of pictures, should they be taken under certain circumstances:
If the subject is highly reflective or shiny.
If the subject is moving at high speed.
When there is strong reflected light, or when the background is very bright.
23
