Connecting to a Power Source

Using the batteries

: If the camera does not turn on after you have inserted batteries,

please check whether the batteries are inserted with the correct

 

 

 

polarity(+/-).

1.Open the battery chamber cover by pushing in the direction of the arrow.

2.Insert the batteries taking note of the polarity (+ / -).

3.To close the battery chamber cover, push it until it clicks.

Removing the battery

1. Turn off the camera power. Open the battery chamber cover and move the battery holder aside. The battery will be released.

2. Take out the battery and close the battery chamber cover.

INFORMATION

When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause the battery chamber cover modification or breakage.

There are 3 indicators for battery condition that are displayed on the LCD monitor.

Battery indicator

 

 

 

Battery status

The batteries are fully

Prepare new batteries

There is no battery capacity.

charged

Replace with new batteries.

16