+/- button
Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.
1.Select the CUSTOM (
) menu of the White Balance. You can select CUSTOM 1 or CUSTOM 2 white balance.
2.Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHUTTER button.
3.The value you set will be saved.
-The custom white balance value will be applied, starting with the next picture you take.
-The user configured white balance will remain effective until it is overwritten.
MEASURE : SHUTTER |
[White paper]
Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions.
You can also select the exposure value by using the +/- button.
Compensating Exposure
1.Press the +/- button, and then use the UP and DOWN buttons to select the exposure compensation icon ( 
).
The exposure compensation menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to set the desired exposure compensation factor.
3.Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will close. If you change the exposure value, the exposure indicator ( 
) will be displayed on the bottom of the LCD monitor.
*A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.
42
