Special Effect : Composite shots
You can combine 2~4 different shots in a still image.
1.Select the PROGRAM, MySET, Aperture priority, Shutter priority or MANUAL modes. Then press the menu button.
2.Press the LEFT/ RIGHT button and select the [Special
Effect] menu tab. |
|
|
|
| ||
NOR |
|
| ||||
|
|
| ||||
3. Select the [Composite] menu by pressing the UP/ DOWN | Special Effect | |||||
button and press the Right button. | HighLight | Off | ||||
4. Select a desired sub menu by pressing the UP/ DOWN | Composite |
| Off | |||
Photo Frame | Off | |||||
button and press the OK button. |
| |||||
| Move : | Change: | ||||
|
|
-[Off] : cancels the composite shots
-[2 Parts] : 2 different shots are combined in a still image.
-[3 Parts] : 3 different shots are combined in a still image.
-[4 Parts] : 4 different shots are combined in a still image.
5.Press the menu button twice and the menu will disappear.
6.The number of frames you selected in step 4 is displayed on the LCD monitor. Press the shutter button to start the composite shots.
Selecting 2 composite shots
Pressing the shutter button
Pressing the shutter button
[1/2] | [2/2] | [The result image] |
INFORMATION
You can use the flash button,
If you change the image size, press the camera buttons (Play mode button, Voice recording(Pressing the UP button twice)) or rotate the mode dial during the composite shots, the captured images aren’t saved and the first step of the composite shot will display on the LCD monitor. Do not press the camera buttons or rotate the mode dial during the composite shots. The voice memo will start after taking the last composite shot.
55