![](/images/new-backgrounds/1278718/27871821x1.webp)
Y O U R N E W T V
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. For more information on connecting equipment, see pages 18~22.
Œ ANTENNA terminals | ∏ Audio/Video Output jacks |
Two independent cables or antennas can be | Connect to the audio/video input jacks of a |
connected to these terminals. Use “Cable IN” | recording VCR. |
and “Air IN” terminals to receive a signal from | ” Video Input jacks |
VHF/UHF antennas or your cable system. Use | |
the “Cable OUT” terminal to send the signal | Connect to the video output jacks of VCRs, DVD |
being received by the “Cable IN” terminal out to | players and similar devices. |
another component (such as a Cable | ’ Audio Input jacks |
Box). The PIP channel can be received only | |
when a signal source is connected to “Cable | Connect to the audio output jacks of VCRs, DVD |
IN”. | players and similar devices. |
´CableCARD Slot
Insert the CableCARD into the slot.
ˇDVI Video Input jack
(Digital Visual Interface)
Connect the DVI jack to a device with DVI output.
¨Anynet
Please refer to the Anynet Owner’s Instructions.
ˆOPTICAL Output jack
Connect to a Digital Audio component.
ØCOAXIAL Output jack
Connect to a Digital Audio component.
˝DVI Audio Input jacks
Connect to the audio output jacks of a device with DVI.
ÔS-Video Input jack
Connect to
COMPONENT Input jacks (Y, PB, PR, AUDIO-L/R)
Connect to the Component audio and video outputs of DVD or DTV