O P E R AT I O N
4 | T V | Auto Program | |||
Select the antennas to memorize | |||||
Press the ▲ or ▼ button | |||||
to select the antenna | Air |
| Start |
| |
connection, then press the | Cable |
| Start |
| |
Air + Cable |
| Start |
| ||
ENTER button |
|
| |||
|
|
|
| ||
|
|
|
|
| |
œ Air : “Air” antenna signal |
Cable : “Cable” antenna |
signal |
Air+Cable : “Air” and “Cable” |
antenna signals |
œ If the CableCARD is inserted |
into the “CableCARD” slot on |
the rear panel, “Cable” and |
When selecting Cable TV system:
Press the ▲ or ▼ button to select “Cable”, then press the ENTER button. Press the ▲ or ▼ button to select “STD”, “HRC” or “IRC”, then press the ENTER button.
T V | Auto Program |
Select the antennas to memorize
Air | Start |
Cable | Start |
Air + Cable | Start |
T V | Auto Program |
| Select the cable system. |
| STD |
| HRC |
| IRC |
“Air+Cable” are not available. |
œSTD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory”.
Storing Channels in Memory
5 |
|
|
|
|
|
T V | Auto Program |
| |||
|
|
|
|
| |
Press the ▲ or ▼ | Select the antennas to memorize |
| |||
button to select the | Air |
| Start |
|
|
antennas to memorize. | Cable |
| Start |
|
|
Air + Cable |
| Start |
|
| |
Press the ENTER button |
|
|
| ||
|
|
|
|
| |
to select “Start”. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6
Press the ENTER button to start the auto program. The TV begins memorizing all available stations. Press the ENTER button at any time to interrupt the memorization process.
Press the EXIT button to exit.
Auto Program
Auto Program in Process
AIR Channel 15
Stop
œThe TV MUST be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.
•All available DTV and analog channels are automatically stored in memory when channels are selected by the direct tuning function.
