System setting
| Demo | Anynet+ |
Demo mode automatically shows you the major functions that are included with your camcorder so that you may use them more
This camcorder supports Anynet+. Anynet+ is an AV network system that lets you control all connected Samsung AV devices with
easily.
an Anynet+ supported Samsung TV remote control.
1.Touch the Menu ( 
) Setting (
) tab “Demo.”
2.Touch the desired submenu item.
3.To exit the menu, touch the Exit ( 
) or Return (
) tab.
Demo
Off
On
1/1
1.Touch the Menu ( 
) Setting (
) tab “Anynet+ (HDMI- CEC).”
2.Touch the desired submenu item.
3.To exit the menu, touch the Exit ( 
) or Return (
) tab.
Anynet+
Off
On
1/1
Submenu items
•Off: Disable the Demo function.
•On: Enables the Demo function.
Using the Demo function
You can easily operate demo function touching Menu (
) tab for 5 seconds.
The Demo mode is canceled in the following cases:
-If the LCD screen is touched.
-If you press any button (Recording start/stop,
(OIS), Display ( 
), SMART AUTO, MODE, PHOTO, etc.). However, the camcorder enters the Demo mode automatically after 5 minutes in STBY mode if it is idle for 5 minutes without an operation. If you don’t want the Demo function to start, set “Demo” to “Off.”
The Demo function does not operate in the following case:
- If you set “Auto Power Off” to “ Min” and you are using the battery to power the camcorder, the Auto Power Off function turns the camcorder off before Demo can run.
Submenu items
•Off: Disables the function.
•On: The Anynet+ function is enabled.
When the camcorder is connected to an Anynet+ supported TV, you can operate some functions of the camcorder using the TV’s remote control.
• When you turn on the camcorder and it is connected by an HDMI cable to a TV that supports Anynet+, the TV automatically turns on. If you do not want to use the Anynet+ function, set the “Anynet+
•For details on the Anynet+