Samsung HMX-QF30WP/XIL, HMX-QF30BP/EDC manual Connecting to a Wlan and configuring network settings

Connecting to a WLAN and configuring network settings

Configuring the network settings		5 Touch the     tab.
You can configure network settings manually. Note that configuring		• The camcorder connects to the network via the selected AP.
these settings manually are not necessary in most cases. If your		• Even if AP authentication and Data Encryption have been detected,
camcorder connected to the network after you followed the directions
		set the authentication mode to Open or Shared.
on page 72, your camcorder has adjusted these settings and you do
		• If the camcorder does not detect the AP automatically, you can set
not need to configure them manually.
		the network properties directly. page 74
1 Press the [Home (	)] button  touch Social Sharing.	• Data encryption settings by authentication type are below:
		- Open  Disabled or WEP
2 Touch the MENU (	) tab  Wi-Fi Setting.	- Shared  WEP
		- WPA-PSK  TKIP, AES, or TKIP/AES Mixed
• The camcorder automatically searches for available AP devices.		- WPA2-PSK  TKIP, AES, or TKIP/AES Mixed
3 Touch the     tab next to an AP.		• When the Data Encryption function is set to WEP or TKIP for
		802.11n AP connection, you can access in the 802.11g mode.
		In the 802.11g mode, the network connection and speed are not
Wi-Fi Setting		guaranteed.

Samsung 1

Samsung 2

Samsung 3

Samsung 4

4 Touch each submenu and enter the required information.

Item	Description
Authentication	Select an authentication type according to your AP’s setting.
	When you select Open or Shared, WPA is automatically set.
Data Encryption	Select an encryption type according to your AP’s setting.
Network	Enter the password using the virtual keyboard. page 75
Password
IP Setting	The default is Auto. You can select Manual to set the IP
	address manually.
	Wireless network 73