Honeywell SMV 3000 user manual Table C-3 Liquid Propane Configuration Example

C.3 Dynamic Compensation Flow Equation, Continued

Table C-3 Liquid Propane Configuration Example

Step

1

2

3

4

5

6

7

8

Action

Select a template for the SMV 3000 model you have for your flow application.

Select mass flow in the Algorithm field of the FlowAlg tab and then select the Engineering Units (lb/m) on the FlowConf tab card.

Click the Wizard . . . on the SCT/SMV 3000 configuration window to

access the Flow Compensation Wizard Equation Model page.

Select Dynamic Corrections from the list box on the Equation Model page of the Flow Compensation Wizard to invoke the Dynamic Flow Compensation Model, then click Next to proceed to the Flow Element Properties page.

Enter the relevant information from the Orifice Sizing Data Sheet in each entry field of the Flow Element Properties page:

Element Type	= Flange tap
		(D greater than 2.3 inches)
Bore Diameter	= 1.8611 inches
Material	=	304 SS
Flowing Temperature	=	100°F

•The expansion coefficient is automatically calculated based on the entered data.

Click Next to proceed to the Fluid State page.

Select the fluid state as Liquid from the list on the Fluid State page, then click Next to proceed to the Liquid Flow page.

Select Mass as the type of liquid flow from the list box on the Liquid Flow page, then click Next to proceed to the Fluid page.

Select PROPANE as the type of fluid from the list box on the Fluid page, then click Next to proceed to the Pipe Properties page.

Enter the relevant information from the Orifice Sizing Data Sheet in each entry field of the Pipe Properties page:

Pipe Schedule	= 40s
Nominal diameter	=	4 inches
Material	=	Carbon Steel

•The actual diameter and thermal expansion coefficient for the pipe are automatically calculated based on the entered data.

•Click Next to proceed to the Discharge Coefficient page.

Continued on next page

182 SMV 3000 Transmitter User’s Manual 1/99