6.3Configuring the SMV 3000 with The SCT

Using the SCT for SMV 3000 Configuration

ATTENTION

The SCT template files have tab cards that contain data fields for the SMV parameters which you fill in. You start with the Device tab card to enter the device tag name (Tag ID) and other general descriptions. Next, you can select each tab card in order and configure each PV (PV1, secondary variable if desired, PV2, PV3, and PV4).

SMV Process Variable

 

SCT Template Tab Card

PV1 (Differential Pressure)

 

DPConf

 

PV2 (Absolute Pressure or

 

APConf or GPConf *

 

Gauge Pressure) *

 

 

PV3 (Process Temperature)

 

TempConf

 

PV4 (Flow)

 

FlowConf

 

* PV2 will be AP of GP depending on SMV model

Use the Flow Compensation Wizard to setup the SMV 3000 for flow applications. The flow wizard guides you through the steps necessary to complete your flow configuration. See Subsection 6.10 and Appendix C for more information about the flow wizard.

In the subsections below information is given for filling in some of the SCT tab card data fields. Supplementary background information and reference data on SMV configuration that may be helpful is also presented. Use the SCT on-line help and user manual for detailed “how to configure” information.

If the transmitter detects an incomplete database upon power-up, it will initialize the database parameters to default conditions. A setting or

selection with a superscript “d” in the following subsections identifies the factory setting.

1/99

SMV 3000 Transmitter User’s Manual

49

Page 61
Image 61
Honeywell user manual Configuring the SMV 3000 with The SCT, Using the SCT for SMV 3000 Configuration