Honeywell SMV 3000 Overview, Changing database parameters configuration, About Configuration

6.2Overview

About Configuration	Each SMV 3000 Transmitter includes a configuration database that
	defines its particular operating characteristics. You use the SCT 3000 to
	enter and change selected parameters within a given transmitter’s database
	to alter its operating characteristics. We call this process of viewing and/or
	changing database parameters “configuration”.
	SMV configuration can be done using the SCT either on-line, where
	configuration parameters are written to the SMV through a direct
	connection with the SCT, or off-line where the transmitter configuration
	database is created and saved to disk for later downloading to the SMV.
	Figure 20 shows a graphic summary of the on-line configuration process.

Figure 20 SMV On-line Configuration Process

				Data written to SMV
SMV Configuration				during configuration.
Database created using
		-
SCT Configuration	Power		250Ω
Forms (Tab Cards).	Supply	+

SMV Configuration

Database File savedSMV 3000 on Diskette

24099

Configuration Summary

The SCT contains templates that you can use to create configuration database for various smart field devices. The SMV templates contain the configuration forms (or tab cards) necessary to create the database for an SMV transmitter.

Continued on next page

1/99 SMV 3000 Transmitter User’s Manual 47