Honeywell SMV 3000 user manual Appendix B- Configuration Record Sheet

Appendix B– Configuration Record Sheet, Continued

1b. Static Pressure - PV2 - Configuration Section
PV2 Damping (sec.):	0.0 ___	0.16 ___	0.32 ___	0.48 ___	1 ___	2 ___
	4 ___	8 ___	16 ___	32 ___
PV2 Eng. Units:	"H2O_39F ___		PSI ___		MPa ___		bar ___
(Static Pressure)	kg/cm^2 ___		mmH2O_4C ___		mmHg_0C ___		KPa ___
	mbar ___		g/cm^2 ___		inHg_32F ___		ATM ___
	mH2O_4C ___		"H2O_68F ___		"H2O_60F ___
PV2 Range:	LRV _____		URV _____
(default depends on SMV 3000 model number - specify gauge or absolute)
Barometric Pressure:	___________

(If using SMV 3000 in a flow application and you specify the SMG170 model number, enter the barometric pressure) (Default is 14.7 psia)

1c. Process Temperature - PV3 - Configuration Section
PV3 Damping (sec.):	0.0 ___	0.3 ___	0.7 ___	1.5 ___	3.1 ___ 6.3 ___
	12.7 ___	25.5 ___	51.1 ___	102.3 ___
PV3 Probe Type:	PT 100 D RTD ___		Type E TC ___		Type J TC ___
	Type K TC ___		Type T TC ___
PV3 Eng. Units:	deg. C ___		deg. F ___		deg. R ___
PV3 Range:	LRV _____		URV _____
(defaults are -200and 450 deg. C)
PV3 Cold Junc. Comp.:	Internal ___		External ___		ECJT: _____
(Only for Themocouple. If external, specify the temp. in the ECJT slot)
PV3 TC Fault Detection:	On ___	Off ___
PV3 Output Charact.:	Linear ___		Non-Linear ___

Continued on next page

172 SMV 3000 Transmitter User’s Manual 1/99