11.4Diagnostic Messages

Diagnostic Messages

Diagnostic Message Table Headings

The diagnostic text messages that can be displayed on the SCT, SFC or on a TPS/TDC system are listed in the following tables. A description of the probable cause and suggested action to be taken are listed also to help in troubleshooting error conditions.

The messages are grouped in tables according to the status message categories.

Table 31 lists Critical status diagnostic messages

Table 32 - Non-critical status messages

Table 33 - Communications status messages

Table 34- Informational status messages

Table 35- SFC Diagnostic messages

SMV Status column provides the location of the SMV status. If you are using one of the diagnostic tools (SCT, SFC or Universal Station) that contains an earlier software version, you may see the diagnostic messages displayed as these SMV Status numbers.

The SCT Status Message column shows the text which appears in the Status tab window when the SCT is in the on-line mode and connected to the SMV control loop.

The SFC Display Message column shows the text which appears when the SFC is connected to the SMV control loop and the [STAT] key is pressed.

TDC Display Status Message column shows the text which appears on a TPS/TDC Universal Station.

Some messages and information in the tables are specific to the SCT or SFC and are noted.

Continued on next page

122

SMV 3000 Transmitter User’s Manual

1/99

Page 134
Image 134
Honeywell SMV 3000 user manual Diagnostic Messages Diagnostic Message Table Headings