Honeywell Getting SMV 3000 Transmitter On-Line Quickly, Task Description Reference Section

2.2Getting SMV 3000 Transmitter On-Line Quickly

Quick Start-up Tasks Table 1 lists common start-up tasks for an SMV 3000 transmitter using the SCT and gives an appropriate section in this manual to reference for more information about how to do the task. The start-up tasks are listed in the order they are commonly completed.

Table 1 Start-up Tasks Reference

Task

Description Reference Section

1

2

3

4

5

6

Put analog loop into manual mode.

Connect SCT to transmitter and establish communications

Identify transmitter’s mode of operation.

Change mode of operation, if required.

Check/set output conformity (Linear/Square Root) for PV1.

Check/set damping times for all PVs.

Appropriate vendor documentation for controller or recorder used as a receiver in analog loop with SMV 3000 transmitter.

5.2

5.3

5.3

6.6

6.6(for PV1)

6.7(for PV2)

6.8(for PV3)

6.9(for PV4)

7

8

9

10

11

12

13

Check/set Probe Configuration for PV3

Check/set PV4 Algorithm

Check/set Lower Range Values and Upper Range Values for all PVs.

Select PV to represent output for transmitter in analog mode only.

Run optional output check for analog loop.

Perform start-up procedures - Check zero input and set, if required.

Check transmitter status, access operating data.

6.8

6.9, 6.10, 6.11

6.6(for PV1)

6.7(for PV2)

6.8(for PV3)

6.9(for PV4)

6.5

7.3

7.5

8.2

12 SMV 3000 Transmitter User’s Manual 1/99