Honeywell SMV 3000 user manual # in User Sub-Section Description of Change

Additions to the User Manual

The additions and changes to User Manual 34-SM-25-02 that relate to the newly designed meter body and process heads are given in Table 1 of this addendum.

Use the information in Table 1 to reference and annotate your User Manual.

Table 1 Additions/Changes to the User Manual

Page # in User	Sub-Section	Description of Change
Manual
15	3.2 Considerations for SMV	The Maximum Working Pressure Rating and the
	3000 Transmitter	Overpressure Rating has been enhanced for all
	Table 3 Transmitter	models included in this addendum except for the
		draft range transmitter.
	Overpressure Ratings
		For more information, refer to Table 1 in this
		Addendum.
28	4.5 Piping SMV 3000	In Step 5 of Table 6, do not use the torque
	Transmitter	•
		specification of 47.5 to 54 N m(35 to 40 lb-ft).
	Table 6 Installing ½ inch NPT	Instead, torque Flange Adapter bolts evenly to
	Flange Adapter	47,5 N•m +/- 2,4 N•m (35 Lb-Ft +/- 1.8 Lb-Ft).
102	9.3 Inspecting and Cleaning	Do not use specifications for head bolt torque given
	Barrier Diaphragms	In Step 8 of Table 27.
	Table 27 Inspecting and	Instead, torque head bolts/nuts to the specifications
	Cleaning Barrier Diaphragms	given in Table 2 of this addendum.
110	9.5 Replacing Meter Body	Do not use specifications for head bolt torque given
	Center Section	In Step 9 of Table 29.
	Table 29 Replacing Meter Body	Instead, torque head bolts/nuts to the specifications
	Center Section	given in Table 2 of this addendum.
143	Replacement Parts	Figure 32 illustrates and Table 38 lists the
	Figure 32 SMV 3000 Meter	replacement part available for the previous design
		of the transmitter.
	Body
	Table 38 Parts Identification for	For the newer design, use Figure 1 of this addendum
		to locate parts, and use Table 3 of this addendum for
	Callouts in Figure 32
		part numbers and descriptions.
		For applicability of parts, refer to
		34-SM-03-01
		SMV 3000 Smart Multivariable Flow Transmitter
		Specification and Model Selection Guide
147	Wiring Diagrams and Installation	The numbers of installation drawings for transmitter
	Drawings	models of revision S and greater is given in Table 7
		of this addendum.

2 of 8 34-SM-99-01 (Addendum to 33-SM-25-02) 03/04