Samsung HMX-T10BN Button does not start recording, Features used, Estimated recording time

troubleshooting

Recording

Symptom	Explanation/Solution
Pressing the Recording start/stop		Press the MODE button to set the record mode. page 24
		There is not enough free space to record on the storage media.
button does not start recording.
		Check if memory card is not inserted or write-protect tab is set to lock.
	 The estimated recording time may vary depending on content and
The actual recording time is less than the		features used.
estimated recording time.		When you record an object that moves quickly, the actual recording
		time may be shortened.
	 There is no more free space for recording on the storage media.
		Back up important files on your PC and format the storage media or
		delete unnecessary files.
The recording stops automatically.		If you make recordings or delete files frequently, the performance of the
		storage media deteriorates. If this occurs, format the storage media again.
	 If you use a memory card with a low write speed, the camcorder
		automatically stops recording videos and displays a message on the
		LCD screen.
When recording a subject illuminated by		This is not a malfunction.
bright light, a vertical line appears.
When the screen is exposed to direct
sunlight during recording, the screen		This is not a malfunction.
becomes red or black for an instant.
During recording, the date/time does not		“Date/Time Display” is set to “Off.” Set the “Date/Time Display”
display.		to On. page 77
	 Set your camcorder to the record mode. page 24
You cannot record a photo image.		Release the lock on the write-protection tab of the memory card if any.
		The storage media is full. Use a new memory card or format the
		storage media. page 74 Or remove unnecessary images. page 69
	 Set “Shutter Sound” to “On.”
You don’t hear the shutter sound when		During dual recording (video and photo), the Shutter Sound is off.
you record a photo image.		When the Mini HDMI cable or Audio/Video cable is connected to the
		camcorder, the Shutter Sound is not available.
	 Set “Beep Sound” to “On.”
You don’t hear the beep sound.		Beep sound is temporally off while recording videos.
		When the Mini HDMI cable or Audio/Video cable is connected to the
		camcorder, the Beep Sound is not available.
There is a time difference between the		On your camcorder, there may be a slight time delay between the point
point where you press the Recording
		where you press the Recording start/stop button and the actual point
start/stop button and the point where
		where the recorded video starts/stops. This is not an error.
the recorded video starts/stops.

108Horizontal stripes appear on the images.  This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. This is not a malfunction.