Samsung HP-P5091 manual Memorizing the Channels, Selecting the Video Signal-source

Memorizing the Channels

Your PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the WIRELESS HOME AV CENTER (i.e., an antenna or a cable system).

Press the MENU button. Press the ▲ or ▼ button to

1 select “Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “Select Antenna”,

2 then press the ENTER button.

Press the ▲ or ▼ button to select “Air” or “Cable”,

3 then press the ENTER button.

4 Press the MENU button to exit.

TVChannel

Select Antenna	: Air	√
Auto Program		√
Add/Delete		√
Fine Tune		√
Signal Strength		√
Move	Enter	Return

TVChannel

Select Antenna	: Cable
		Air
Auto Program		Cable
Add/Delete
Fine Tune
Signal Strength
Move	Enter	Return

TVChannel

Select Antenna	: Cable
		Air
Auto Program		Cable
Add/Delete
Fine Tune
Signal Strength
Move	Enter	Return

35