Fine Tuning (Phase)
Preset:
• Press the RGB button to select the PC mode.
Press the Menu button. Move the joystick up or
1 down to select the SETUP, then press the joystick to enter.
Move the joystick up or down to select the “Image
2 Lock”, then move the joystick left or right to enter.
3 Move the joystick up or down to select the “Phase”. Remove picture noise (vertical stripes) on the screen by moving the joystick left or right.
(If phase is not set properly, the picture may be blurry.)
4 Press the Menu button to exit.
Position
Language 
English
Scaling 
Wide
Zoom/Panning
Image Lock
Miscellaneous
Move 
Adjust 
Exit
Position
Language 
English
Scaling 
Wide
Zoom/Panning
Image Lock
Miscellaneous
Move 
Adjust 
Exit
Auto Adjustment |
| |
Frequency |
| 0 |
Phase |
| 0 |
Move | Adjust | Exit |
Phase | 50 |
55
