Wall Installation Instructions
Installation Notes
1 Do not install the PDP in any location other than a vertical wall.
To protect the performance of the PDP and prevent problems, avoid the following
2 places.
•Do not install next to smoke and fire detectors.
•Do not install in an area subjected to vibration.
•Do not install in an area subjected to high voltage.
•Do not install near or around any heating apparatus.
3 Use only recommended parts and components.
Parts (Wall attachment panel is sold separately. Check with your dealer)
Wall attachment panel
HPN5039 | HPN6339 |
Insulation holders | Screws |
(HPN5039; 4 EA | (HPN5039; 4 EA |
HPN6339; 6 EA) | HPN6339; 6 EA) |
14
Fixing the PDP panel to the wall attachment panel bracket
1 Remove the screws on the rear of the PDP panel.
HPN5039 |
| HPN6339 |
Removing four screws | Removing six screws |
|
2 Connect Insulation holders to screws. (see the illustration below)
3 Tighten the screws connected to the Insulation holders on the rear of the PDP panel.
HPN5039 | HPN6339 |
Connecting four screws | Connecting six screws |
15
