Changing the Screen Size | Samsung HPN6339, HPN5039 instruction

Changing the Screen Size

When you press the ASPECT button on the remote control, the PDP’s screen mode should appear in sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Normal.

Note

•If you watch a still image or the Normal (4:3) mode for a long time (over 2 hours), an image may be burned onto the screen. View the monitor in Wide or Panorama mode as much as possible.

Wide		Zoom2
Sets the picture to 16:9 wide mode.		The screen size when the Zoom1 screen is
		vertically enlarged.

Changing the Screen Size

Still

Press the Still button on the remote control to freeze a moving picture. Press again to cancel.

Wide

Panorama

Converts regular 4:3 aspect ratio screen to wide screen.

Panorama

Zoom1

Zoom2 Up/Down

Normal (4:3)

Sets the picture to 4:3 normal mode.

Normal

The screen size when Wide screen is vertically enlarged.

Zoom1 Up/Down

Notes

•In TV, VIDEO, S-VIDEO and Component(480i) modes, all screen modes can be selected. (Wide ➝ Panorama ➝ Zoom1 ➝ Zoom2 ➝ Normal).

•In PC/DVI mode, only Wide & Normal modes can be selected.

•In Component(480p, 720p. 1080i) modes, Panorama mode can’t be selected.

•In Component(480p, 720p. 1080i) modes, you can move the picture on screen by pressing the Up▲ or Down▼ button. (All screen modes)

•Changing the screen size to Normal, Zoom1 or Zoom2 during PIP mode will cause the PIP

50 window to disappear.

51

Image 26

Samsung HPN6339, HPN5039 manual Changing the Screen Size

Contents

Owner’s Instructions Important Safety Information Thank You for Choosing Samsung FCC Information User Instructions Table of Contents User Instructions General Information Your New Plasma Display Panel Remote Control Buttons Wall attachment panel Wall Installation InstructionsInstallation Notes Changeing the angle How to Adjust Mounting AngleFactory default PDP panel Wall Connections Antennas with 75-ohm Round Leads Connecting VHF and UHF AntennasConnecting Cable TV Cable without a Cable Box Connecting Speakers Capability of 10 watts minimum impedance 8 ohm Connecting a VCR to the Video or S-Video/Audio jack Connecting a VCRConnecting a Camcorder Viewing camcorder tapes To Play DVD Playing DVDWatching DTV To Watch DTV Operation Viewing the Menus Turning the PDP On and OffViewing the Menus and Displays Displaying Status Information Selecting the Video Signal-source Memorizing the Channels To View Memorized Channel PIP Mode Using Mute Setting Up Your Remote ControlAdjusting the Volume Changing Channels VCR Codes Cable Box Codes DVD Codes Remote Control CodesPicture Control Press the Menu button, then press the Enter Button Using Automatic Picture SettingsCustomizing the Picture Press the Menu button to exit Selecting the Color Tone DNIe Digital Natural Image engine Press the UP or Down button to select Source Viewing the Picture-in-PictureSelecting the PIP Screen Changing the Size of the PIP Window Changing the Location of the PIP Image STD, HRD or IRC Changing the Screen Size Sound Control Customizing the Sound Using Automatic Sound Settings Press the UP or Down button to select Auto VolumeButton to select Sound, then press the Enter Press the Left or Right button to select Mono Stereo or SAP Using Dolby Virtual Using a Subwoofer Channel Control Fine Tuning Channels LNA Low Noise Amplifier Connecting a PC and Operation Setting up Your PDP Plug and Play Connecting to a PCPin Configuration To watch the PC screen How to Set up Your PC Software Windows only 85.008 43.269 Custom. When Custom is selected, the word Adjusting the PC ScreenAdjusting the R.G.B Color Adjust will appear on the screen Tion, then press the Enter button Vertical, horizontal frequencies and resolutionChanging the Size of the Image Information Appear Coarse Adjustment Picture Quality AdjustmentPicture Automatic Adjustment Remove picture noise on the screen by pressing Time SettingFine Tuning Fine Press the UP or Down button to select Sleep Setting the Clock Setting the Sleep TimerButton to select Function, then press the Enter Setting the Timers Setting the On/Off Timer Setting the Preferred Channel and Volume Level Function Description Selecting a Menu Language Viewing Closed Captions Digital Noise Reduction Setting Auto Power OffPower Off Using the V-Chip How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelines Mpaa Rating Selecting the Film Mode Appendix Troubleshooting Care and Maintenance Specifications Memo