FM ANT. VIDEO OUT | LAN | HDMI OUT |
Video Adapter
Connections 02
Video Cable
METHOD 2 : Composite Video (GOOD QUALITY)
After connect the supplied Video Adapter to the VIDEO OUT on the rear of the product, connect the Video Adapter and the VIDEO IN of the TV with video cable.
✎NOTE
The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the Setup menu. (See page 28)
After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select VIDEO as the external source of the TV.
!CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.
Connecting the FM Antenna
FM Antenna (supplied)
FM ANT. VIDEO OUT
1.Connect the FM antenna supplied to the FM ANTENNA Jack.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
✎NOTE
This product does not receive AM broadcasts.
English 21