≈∞Δ˘ 99.1.20 2:58 PM Δ‰¿Ã¡ˆ12
ANSWERING AN OUTSIDE CALL
•Lift handset and you are automatically connected to the ringing call. See Ring Preference under Customizing Your Keyset - OR - press the ANS/RLS key to automatically answer on the speakerphone.
NOTE: If a call is flashing at your keyset but not ringing, you must press the flashing button to answer.
UNIVERSAL ANSWER DEVICE
Outside lines can ring over the paging system or to a loud ringer. To answer calls ringing in night service to this device, dial 67 or press the UA key. This device can operate in the Day or Night mode.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK before dialing.
RECALL DIAL TONE
Press the NEW button to disconnect your existing call, wait for dial tone and then make a new call on the same line.
NOTE: If this button does not appear on your keyset, the FLASH key may be programmed to recall dial tone.
SENDING A FLASH
While on an outside call, press the FLASH key to send a flash to the telephone company. This is required for some custom calling features or CENTREX use.
12
