Samsung LCD12B, STD24B, STD12B manual ONE Touch Speed Dialing

≈∞Δ˘ 99.1.20 2:58 PM Δ‰¿Ã¡ˆ26

For the purposes of programming speed dial numbers, the last 6 programmable keys of the right hand row are known as A, B, C, D, E and F and are defined below.

•The A key is not used.

•The B key inserts a flash.

•The C key inserts a pause.

•The D key is used for pulse to tone conversion. If your system uses rotary (or pulse) dialing C.O. lines, pressing D while entering a speed dial number causes all subsequent digits to be sent as DTMF tones.

•The E key is used to hide digits. Display keyset users may want to hide some speed dial numbers so that they will not show in the display. When you are entering a telephone number, press E. All subsequent digits will be hidden. Press E again to begin displaying digits.

•The F key is used to enter a name. See Personal Speed Dial Names under Display Features.

•Use the HOLD key to clear a speed dial number.

ONE TOUCH SPEED DIALING

You may assign any speed dial number to an already existing one touch speed dial button for quick and easy dialing of frequently used numbers.

•While on-hook, press TRSF and then dial 107.

•Press a One-touch speed dial button.

•Dial the speed dial number (00-49or 500-999) that you want assigned to this button.

•Press TRSF to store your selection.

To call this telephone number, just press the One-touch speed dial button.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset or press SPK before you begin dialing.

26