≈∞Δ˘ 99.1.20 2:58 PM Δ‰¿Ã¡ˆ42
AUTOMATIC HOLD
While on a outside call, pressing a line key, route key or a flashing CALL button will automatically put your call on hold and connect you to the next call. This feature can be turned on or off at your keyset.
•With the handset
•Dial 01 to turn Automatic Hold on or 00 to turn it off.
•Press TRSF to store your selection.
HEADSET OPERATION
Keyset users can switch between headset mode and handset mode. When using headset mode, press the ANS/RLS key to answer and release calls.
•With the handset
•Dial 21 to use the headset or 20 to use the handset.
•Press TRSF to store your selection.
NOTES:1. When you are in headset mode, your speaker phone is disabled.
2.When you place your keyset in headset mode, the ANS/RLS key will light steady to indicate that your station is in headset mode.
HOT KEYPAD
On the DCS, your keyset's keypad can be made "live" or "hot" so that it is not necessary to lift the handset or press SPK before you begin dialing. Calls can be made and features activated by simply dialing the C.O. line number, trunk group access code, intercom number or feature access code. To activate this feature.
•With handset
•Dial 31 to turn the Hot Keypad on or 30 to turn it off.
•Press TRSF to store your selection.
42