≈∞Δ˘ 99.1.20 2:58 PM Δ‰¿Ã¡ˆ46
[CALL FROM 203], [TRSF TO 202], [701 RINGING], [TRANSFER FM 203], [708 busy], [Camp on to 204], [Recall from 204 ], [Call for 501], [message frm 204] and [FWD ALL to 204] keep you informed of what is happening and where you are. In some conditions you are prompted to take an action and in other cases you receive directory information.
DISPLAY NUMBER DIALLED
Display keysets begin showing digits as they are dialled. They will stay in the display until the call duration timer comes on automatically or the TIMER button is pressed. If the call duration timer is not used, the number dialled is displayed until the call is released, transferred or put on hold.
CALL DURATION TIMER
The system can be set to automatically time outside calls. A few seconds after you dial a telephone number, the timer will appear in the display. It appears immediately for incoming calls. The call timer continues for the duration of the call. The call timer continues for the duration of the call. Call duration times are displayed in minutes and seconds. If a call lasts longer than 99 minutes, the timer restarts.
You can press the TIMER key to manually begin timing a call. Press it again to stop timing. If you press it while automatic timer is on, the call duration time is restarted.
AUTO TIMER
Display keyset users may have the timer automatically start when they answer incoming calls or after a short delay on an outgoing call.
•With the handset
•Dial 11 to turn the auto timer on or 10 to turn it off.
•Press TRSF to store your selection.
46
