Samsung ME9114GST1/SLI manual Checking That Your Oven is Operating Correctly, Setting the Time

CHECKING THAT YOUR OVEN IS OPERATING CORRECTLY

The following simple procedure enables you to check that your oven is working correctly at all times.

Open the oven door by pushing the push button on the bottom side of the control panel. Place a glass of water on the turntable. Then, close the door.

1. Press the Number button to enter operating time. (4 to 5 minutes)

2.Press the START button.

Result: The oven light comes on and the turntable starts rotating.

1)Cooking starts and when it has finished the

oven beeps 4 times.

2)The end reminder signal will beep 1 times (once every minute).

3)The current time is displayed again.

The oven must be plugged into an appropriate wall socket. The turntable must be in position in the oven. If a power level other than the maximum is used, the water takes longer to boil.

SETTING THE TIME

Your microwave oven has an inbuilt clock. When power is supplied, “12:00” is automatically displayed on the display.

Please set the current time.

• When you first install your microwave oven

• After a power failure

Do not forget to reset the clock when you switch to and from summer and winter time.

1.Press the Clock button.

2.Use the Number buttons to enter the current time.

You must press at least three numbers to set the clock. If the current time is 5:00 enter 5, 0, 0.

3.Press the START button.

If there is a power interruption, you will need to reset the clock. You can check the current time while cooking is in progress by pressing the Clock button.

English - 14

ME9114GST1_SLI_DE68-04294A-00_EN.indd 14

2014-08-18 ￿￿ 2:59:32